Camera Setup
The items in the Camera Setup menu enable users to set camera parameters, including
camera title, dome protocol and ID for each connected camera. Note that there will be
separate menus for analog cameras and IP ca meras.
THIS DVR DOES NOT SUPPORT IP CAMERAS.
Please refer to the <Analog Camera> menu.
< Analog Camera >
If you are using an analog camera, please continue with this section. Items in this menu are
described in the following subsections.
10. Hue
11. Audio Association
Analog Camera Select
The item is used to select a camera for setting it's parameters. The related
settings will follow the selected camera, such as dome protocol and camera
title. Move the cursor to <Analog Camera Select> and press ENTER, then
select a channel using UP / DOWN keys.
Dome Protocol
Select the communications protocol associated with your dome camera using
the ENTER and Direction keys. The available protocol includes <DynaColor>,
<AD422>, <Pelco D>, <Pelco P>, <Fastrax 2>, <JVC>, <Panasonic_C>,
<Panasonic_N>, and <None>.
Dome ID
This item is used to assign an ID number (0 to 255) to the selected dome
camera. Note that ID number must match the ID address set by the dome
camera.
Analog Camera
1. Analog Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
User's Manual
CH3
None
0
CH3
No
Yes
0
0
0
0
YES
46