Table 1-3 Power Consumption Of Boards - Sun Microsystems Sun Workstation 100U System Manager's Manual

Sun 100/150 Installation Manual
Unpacking and Setting up the 100U
Table 1-3: Power Consumption of Boards
PART
BOARD
AMPS TOTAL
NUMBER
Q
+5V WATTS
370-1012 Xylogics SMD Disk Controller Board 8.0 45
370-1021
Sky Floating Point Processor
4.0 20
501-0289
Color Display Controller
6.0 36
590-0059 Black and White Display Controller 5.0 25
590-0217
Interphase SMD Disk Controller Board
4.0 23
590-0288 10Mbit Ethernet Board 5.0 31
590-0502 1/2-ineh Tape Controller Board 4.0 20
590-0526 1/4-inch Tape Controller Board 3.0 15
590-1007
Sun-2 CPU Board,
6.0 30
Keyboard, and Mouse
590-1013
1M Memory Board
3.0 15
590-1013
Sun-2 (low power) Memory Board
2.5 13
Note that the keyboard and mouse draw their power fr().m the CPU board.
Review the above list carefully to determine exactly what configuration of boards you can have
in the card cage. If you get boards from other suppliers, make sure you obtain the current
power consumption information from them, so that you can factor that information in with the
list above. Overloading the rated capacity of the power supply can cause system malfunction
(which often shows up as "glitches" on the video screen), and may damage the power supply.
1.3. Receipt and Unpacking Instructions
Note that the 6hipping weight 01 the Sun Workdation and it6 6hipping carton i6 approzimately
105
pound,. The weight 01 the workltation it,ell i, about
90
pound,.
1. When you receive your shipment, inspect all shipping cartons immediately for evidence of
damage. If any shipping carton is severely damaged, request that the carrier's agent be
present when the carton is opened. If the carrier's agent is not present when a carton is
opened and the contents are found to be damaged, keep all contents and packing materials
for the agent's
inspectiou~
2. To open the shipping carton, cut the binding straps on it with a knife or scissors. The ship-
ping carton is in the form of a square 'tube' with two lids on it, one on the bottom, and one
on the top. The workstation is encased in styrofoam packing materials inside the lids.
3. Remove the top lid from the 'tube', and you will find the keyboard, the distribution tape(s),
the power cord, and an envelope containing manuals in the recesses in the top of the packing
Revision H of 12 March 1984
1-3