Sun Microsystems Sun Workstation 100U System Manager's Manual page 311

Fsck Error Conditions Fsck - UNIX File System Checker
(CLEAR)
The inode mentioned in the immediately previous error condition can not be reconnected. This
cannot occur if the file system is being preen'ed, since lack of space to reconnect files is a fatal
error.
Possible responses to the CLEAR prompt are:
YES
de-allocate the inode mentioned in the immediately previous error condition by zeroing its
contents.
NO ignore this error condition.
SORRY. NO lost+tound DmECTORY
There is no
1011+
found directory in the root directory of the file system; f,e" ignores the
request to link a file in
1011+
found. This will always invoke the CLEAR error condition in
Phase 4. Check access modes of 1011+ found. This error is fatal if the file system is being
preen'ed.
SORRY. NO SPACE IN lost+lound DmECTORY
There is no space to add another entry to the
10"+
found directory in the root directory of the
file system; f8ck ignores the request to link a file in
10"+
found. This will always invoke the
CLEAR error condition in Phase
4.
Check size and contents of 10"+ found. This error is fatal
if the file system is being preen 'ed.
LINK COUNT FILE 1=[ OWNER =
0
MODE==MSIZE=S MTIME==T COUNT==X
SHOULD BE
Y
(ADJUST)
The link count for inode I which is a file, is X but should be Y. The owner 0, mode M, size S,
and modify time T are printed. When preen'ing the link count is adjusted.
Possible responses to the ADJUST prompt are:
YES
replace the link count of file inode I with Y.
NO ignore this error condition.
LINK COUNT Dm 1=1 OWNER =
°
MODE==M SIZE==S MTIME== T COUNT==X
SHOULD BE
Y
(ADJUST)
The link count for inode
I
which is a directory, is
X
but should be
Y.
The owner 0, mode M,
size S, and modify time T of directory inode I are printed. When preen'ing the link count is
adjusted.
Possible responses to the ADJUST prompt are:
YES
replace the link count of directory inode I with Y.
NO ignore this error condition.
LINK COUNT F 1=1 OWNER=O MODE==M SIZE==S MTIME==T COUNT==X
SHOULD BE
Y
(ADJUST)
The link count for F inode I is X but should be Y. The name F, owner 0, mode M, size S, and
modify time T are printed. When preen'ing the link count is adjusted.
16
28 July 1983