Sun Microsystems Sun Workstation 100U System Manager's Manual page 57

Sun 100/150 Installation Manual
Installing UNIX ror the First Time
Host Inrormation
Enter your hostname:
lucifer
Is this workstation on a network! (y In): y
Network numbers may be either class A, B or C
Their formats are:
Class A: nnn ( 0
<=
nnn
<=
127)
Class B: nnn.bl (128
<=
nnn
<=
191)
Class C: nnn.b1.b2 (192
<=
nnn
<=
255)
bl and b2 are one byte (0-255) quantites
Enter your network number (derault is 192.9.200):
<RETURN>
Your network number is 192.9.200; is this correct! (y In):
y
Enter your host number
This is a number between 1 and 255:
1"
Your hostname and host number are:
lucirer: 14
Is this correct! (y/n): y
Note that you need your network and host numbers here ir your machine is on a network (see
the earlier section, Determining Network In/ormation, ror an explanation of network and host
numbers). Make sure you have these at hand before starting the dialogue.
The last phase of letup configuration requests inrormation about your tape subsystem:
Tape Information
1) 1/4" SCSI tape (st)
2) 1/2" magnetic tape (mt)
3) 1/4" archive tape (ar)
Enter the number for the type of tape: (1-3): 3
You have specified a 1/4" archive tape; is this correct! (y In): y
When this last phase has been completed, letup asks you whether you want to institute the
configuration you have designed and, if you confirm, proceeds to edit several or the database
files:
You have completed the configuration questions.
Continuing will destroy any existing files under /usr
and any client partitions ir you are a server.
Do you want to begin configuration! (y/n): y
Updating /etc/hosts ....
[ ... A rew lines or configuration messages . . . ]
If your distribution is on two 1/4-inch tape cartridges, letup will prompt you to change to the
second cartridge about two minutes into its back-end routine. Insert the second tape and type
Revision H of 12 March 1984
4-17