Sun Microsystems Sun Workstation 100U System Manager's Manual page 196

IMEMTEST ( 8S )
MAINTENANCE COMMANDS
NAME
imemtest - stand alone memory test
SYNOPSIS
b /atand/lmemteat
DESCRIPTON
IMEMTEST ( 8S )
ImemteBt runs stand alone, not under control of the UNIX operating system. With the PROM
resident monitor in control of the system, type the command:
>
b /atacd/lmemte.t
and the monitor boois the memory test program into memory. Imemte8t is completely self·
explanatory. It prompts for all start and end addresses, and after that it runs under its own
steam. It reports any errors it finds on the screen.
SUD
Release 1.1 Last change; 23 March 1983 41