Sun Microsystems Sun Workstation 100U System Manager's Manual page 75

Sun 100/150 Installation Manual Installing UNIX for the First Time
The following configuration XYI00 is a stripped down version of the GENERIC system for
a system with only a single local peripheral: a Xylogics controller supporting one disk drive.
It's a good example of a standard configuration file:
*
:/1=
Model 100 with one Xylogics Disk
' *
machine
cpu
ident
timezone
max users
options
config
sun
"SUN2"
"XYIOO"
8 dst
2
INET
vm unix root on xy
pseudo-device pty
pseudo-device inet
pseudo-device ether
pseudo-device loop
pseudo-device win32
pseudo-device dtop 1
pseudo-device ms 1
pseudo-device kbl
controller mbO at nexus
r
controller xycO at m bO csr Oxee40 priority 2
disk xyO at xycO drive 0
device ropcO at mbO csr Oxee0800 priority 1
device zsO at mbO csr Oxeec800 flags 3 priority 2
=#
cpu ports
device ecO
at
mbO csr OxeOOOO priority 3
device bwoneO at m bO csr OxcOOOO priority
3
device piO at mbO csr Oxee2000 priority
1
For more examples of standard configuration files, see Appendix C in the paper Building Sun
Workltation Kernel, in the Tutorial, section of this manual.
4. When you ha.'ve finished editing
SYS_NAME,
run config
2 :
#=
lete/eooBs
SYS_NAME
s.
Now change directory to the new configuration directory, •• /
SYS_NAME,
and make the new
system:
2
Note that
ir
the "ident" field (system name) in your configuration file contains any digits,
/ete/eoAM
prints: "config: Line 5: syntax error" at this point. You may ignore the error message.
Revision H of 12 March 1984
4-35