Sun Microsystems Sun Workstation 100U System Manager's Manual page 332

Sendmall Installation and Operatloa Gulde I
1.1. Off-The-Shelf Coaflsuratlon.
You can produce your OWD ,entlmlJil.c/llle by editiDI the leDerie cODliluratioD Ille
provided with this release: lu,,/li6/,endmfJil.,eneric.cl. Proeedurea are liveD in the Set-
ting Up the M(JiI S,Istem sectioD 01 the S,I,'em Set-u, .n4 O,e,.,ion chapter.
1.2. In.tallatlon U.In. the Make8le
A makefile exists iD the root 01 the ,endmlJil direetory that wiD do all 01 these steps
for a 4.2BSD system. It may have to be slightly tailored lor use OD other systems.
Before using this makefile, you should already have created your configuratioD file
and left it in the file "Cf/sl/slem.cr' where '1I,'em is the name 01 your system (i.e., what is
returned by hostname(l)). II you do not have Ao,'nfJme you caa use the declaratioD
"HOST=system" OD the make(l) command line. You should also examine the tile
md/ config.
mI
and change the
mI
macros there to relect any libraries and compiiatioD lap
you may need.
The basic instailatioD procedure is to type:
make
make install
in the root directory of the sendmail distributioD. This will make all binaries and install
them in the standard places. The second mfJke command must be executed as the
superuser (root).
1.3. Inltallatlon by Hand
Along with building a configuration file, you will have to install the ,endmtJiJ startup
into your UNIX system. II you are doing this installation in conjunction with a regular
Berkeley UNIX install, these steps will already be complete. Many 01 these steps will have
to be executed as the superuser (root).
1.3.1. /ulrIHb/lendmall
The binary Cor sendmaiJ is located iD
I
u,,/li6 .
1.3.2. /ulr /Hb/lendmall.el
The configuration file that you created earlier should be installed in
/usr/lib/sendmail.c/; see the Settin, u, IAe MfJil S,l,'em
eectioD iD the
Sr"em
see-u,
and Operation chapter.
1.3.3. /ulr /ueb/newallaaea
If you are running delivermail, it is critical that the newtJlia,e, commaad be
replaced. This can just be a link to ,endmfJil:
rm -C /usr /ucb/newaliases
In /usr/lib/sendmail /usr/ucb/newaliases
1.3.4. /ulr/Hb/lendmall.el
The configuration file must be installed
in lu,,/li6.
This is described above.
1.3.&. /uar /Ipool/mqueue
The directory lus,/spoollmfueue should be created to hold the mail queue. This
directory should be mode 777 unless ,endmfJil is ruD setuid, when mfueue should be
owned by the sendmail owner and mode 755.
Venlon 4.1
Lad Mod 8/11/81