Table of Contents
Advertisement
QUALIFIED
INSTALLER
Fret Brackets Installation
1. Screw 2 thumbscrews into each retainer tab.
2. Fit the retainer tabs to each leg (1 screw per side).
3. Fit the slotted holes in the fret brackets over the
thumbscrews, push fret brackets downwards and
tighten the screws.
Fit thumscrews
to retainer tab
Fit retainer tab
to leg
Slip fret brackets
over thumbscrews
and tighten screws
Hook the upper ange of the bottom cover onto the
window bolts.
Rear View
Top
Bottom
26
Optional Cast Iron Fret Installation
Optional Bottom Cover Installation
Top flange
Top
DO NOT use
this hole
Side View
Front
Rear
Bottom
(end plates longer
than front plate)
Bottom flange
(bends here)
Cast Iron Fret Installation
1. Adjust the screw heads on the back of fret to the
thickness of the fret bracket.
2. Drop the fret into place while guiding the screw
heads into the slots in the bracket.
3. Clip the ash pan cover onto the fret.
Drop fret with
bolt into slotted
bracket (fret
adjusts up or
down to suit)
Hook the top
flange of the
bottom cover
to the window
retaining pins
Advertisement
Table of Contents
