Front Installation; Additional Optional 3 Or 4 Sided Trims; 601Sfb Standard Metal Front; 602Cfb Cast Iron Front - Valor 534 XAN Installation And Owner's Manual

15.1 Additional Optional 3 or 4 Sided Trims

1. Slide a corner connection plate into the channels in the top
trim and a side
trim. Butt the
two trims
together. Fit
four grub
screws and
tighten to
secure the
trims and
Figure 51 Trims & corner plate attachment
corner plate.
See figure 51.
2. Repeat for the other corner(s).
3. Attach the two trim fixing brackets to
the side trims with three screws each
side. The brackets must butt up to the
edges of the corner connection plates.
See figure 52.
4. Attach the complete trim unit to the
firebox with four screws as shown in
figure 53.
15.2 #601SFB Standard Metal
Front
1. Fit the lower louver unit using the
hinge studs and hinge spacers as
shown in figure 54.
2. Fix the two adhesive backed magnet
counter plates to the tabs at the firebox
sides, which line up with the magnets
on the lower louver. See figure 54.
3. Fit the two side channels by hooking
into the openings at the sides of the
firebox as shown in figure 55.
4. Attach the upper louver by hooking
over the tabs near the top of the firebox
sides. See figure 56.

15.3 #602CFB Cast Iron Front

1. Attach the bottom-casting unit by
hooking over the lower tabs at the
firebox sides. See figure 57.
2. Attach the top-casting unit by hooking over the four tabs at the firebox
sides as shown in figure 58.
Figure 57 Bottom casting installation

15. FRONT INSTALLATION

Figure 53 Trim unit
installation
Figure 55 Side channel
installation
30
Figure 52 Trim bracket attachment
Figure 54 Lower louver & magnet counter plate
installation
Figure 56 Upper louver installation
Figure 58 Top casting installation