Side View - Valor Retrofire RF24XBN Installation Manual And User's Manual

QUALIFIED
INSTALLER
Leveling the  rebox in the hearth
The backside of each support leg has a leveling bolt. If
necessary, adjust the level of the  rebox in the hearth.
Burner Module Reinstallation
Note: If the circulating fan is to be installed it
should be done at this point before installing the
burner module. See instructions packaged with the
fan for details of the fan installation.
Reinstall the burner module using the 4 screws
removed previously.
Note: The upper baf e may be removed to gain more
room for the screwdriver to install the rear screws.
Gas Line Connection and Fire Unit Testing
Connect the gas line to the burner module. Check
for leaks, purge the line, and test- re the unit before
installing the window or proceeding with the remainder
of the install——see Lighting Instructions section.
Reinstall the Top Baf e (if removed)
20
Firebox Installation
Leveling
Leveling
bolt
bolt
Front View
Reinstall Burner
Module (4 screws)
Remove Top Baffle
(2 screws)
Remove Top Baffle (optional)
(to provide space for a screwdriver)
Edge fits into
Cleat at Back
of Firebox
Reinstall Top
Baffle (2 screws)
Fret bracket
Leg
Front
Leveling bolt

Side View

Edge Fits into
Cleat at Back
Back