Table of Contents
Advertisement
15.1. Additional
Optional 3 or 4
Sided Trims
•
Slide a corner
connection plate into the
channels in the top trim
and a side trim. Butt the
two trims together. Fit
four grub screws and
tighten to secure the trims
and corner plate. See
figure 45.
•
Repeat for the other corner(s).
•
Attach the two trim fixing brackets to the side trims with three screws each side. The brackets
must butt up to the edges of the corner connection plates. See figure 46.
•
Attach the complete trim unit to the
firebox with four screws as shown in figure
47.
15.2. #601SFB Standard Metal
Front
•
Fit the lower louver unit using the hinge
studs and hinge spacers as shown in figure 48.
•
Fix the two adhesive backed magnet
counter plates to the tabs at the firebox sides,
which line up with the magnets on the lower
louver. See figure 48.
•
Fit the two side channels by hooking into
the openings at the sides of the firebox as
shown in figure 49.
•
Attach the upper louver by hooking over
the tabs near the top of the firebox sides. See
figure 50.
15.3. #602CFB Cast Iron Front
•
Attach the bottom-casting unit by
hooking over the lower tabs at the firebox
sides. See figure 51.
•
Attach the top-casting unit by hooking
over the four tabs at the firebox sides as shown in figure 52.
Figure 50 Upper louver installation
15. FRONT INSTALLATION
Figure 45 Trims & corner plate
attachment
Figure 48 Lower louver & magnet counter plate
installation
Figure 51 Bottom casting installation
Figure 46 Trim bracket attachment
26
Figure 47 Trim unit
installation
Figure 49 Side channel
installation
Figure 52 Top casting installation
Hide quick links:
Advertisement
Table of Contents
