QUALIFIED
INSTALLER
Carefully remove the ceramic logs from the packaging
taking care not to damage them. Install the logs as
described below.
NG ONLY: Drop Rear Log into place
behind front log retainers.
Front Log locating pins
1
Place R/H Cross Log
Onto Locating Pins
3
Place L/H Cross Log
Onto Locating Pins
5
22
Ceramic Logs Installation
LPG ONLY:
Drop Rear Log into
place centered side-
to-side against back
support so the log
sits more vertical.
Please note that the Rear Log will have a different
position depending of the gas type.
The position of the logs is critical to insure the
good performance of the appliance.
Rear Log Touches
Front Log Here
Place Font Log onto locating
2
Pins at Each End
L/H Log Locating Pins
Place Middle Cross Log
Across Gap in Front Log
4
Right Log
Locating Pins