A barrier screen is supplied with this appliance to install
on the Retrofi re window. The barrier screen is designed
specifi cally to prevent any contact with the glass of
the fi replace which becomes hot during operation and
remains hot when cooling.
To install the screen:
1. Hook the bottom of the screen on the edge of the
window frame as indicated.
Convection baffl e
Top view—Hook bottom of screen to bottom of
window frame
Important: The fret retainer brackets are designed to
maintain the required space in front of the screen to
allow the window to move and relieve during a hard
start. It is very important to ensure this area in
front of the screen is kept clear at all times.
Fret Brackets Installation
1. Screw 2 thumbscrews into each retainer tab.
2. Fit the retainer tabs to each leg (1 screw per side).
3. Fit the slotted holes in the fret brackets over the
thumbscrews, push fret brackets downwards and
tighten the screws.
Fit thumscrews
to retainer tab
Fit retainer tab
to leg
Slip fret brackets
over thumbscrews
and tighten screws
Barrier Screen Installation
Optional Cast Iron Fret Installation
2. Push the top of the screen against the top of the
window frame and while holding it swivel down the
lock-in levers and push them sideways away from
the center to secure the screen.
Cast Iron Fret Installation
1. Adjust the screw heads on the back of fret to
the thickness of the fret bracket.
2. Drop the fret into place while guiding the screw
heads into the slots in the bracket.
3. Clip the ash pan cover onto the fret.
QUALIFIED
INSTALLER
Drop fret with
bolt into slotted
bracket (fret
adjusts up or
down to suit)
29