Install Side Shrouds - Valor 700JN Owner's Manual

11. Optional: Lay the twigs on the rocks. They can be
placed as suggested below or elsewhere on the
rocks as long as they do not block the pilot fl ame or
the burner fl ame.
12. Optional: As well, you can add the front bricks if
desired, sliding them under the platform front edge.

Install Side Shrouds

The side shrouds are required to install the front on
the appliance. They are supplied with the engine.
Fit them to the appliance outer case as indicated
(2 screws/side).
See instructions supplied with the front trim for
installation of trim.
Installation
IMPORTANT:
slightly
7) overhang
Pilot
The rocks of the top row (14, 11, 9 and
over the burner.
These rocks overhang slightly above the
burner but do not touch the black base
Burner rail
Door hinge tabs
should face
inwards
QUALIFIED
INSTALLER
35