Indicators; Powerscan® M8500 Led Indicators; Beeper - Datalogic PowerScan M8500 Product Reference Manual

Technical Features

Indicators

PowerScan® M8500 LED Indicators
The PowerScan® M8500 family uses green LED indicators to signal the following reader
functions:
Power ON
Normal Function

Beeper

The PowerScan® M8500 basic software provides beeper signals for good/wrong reading
and for indicating errors. Its tone, volume and duration can be directly configured by using
the codes given in the PowerScan® M8500 Reference Manual available on the website.
The application program can also manage the beeper (User Defined Beeper) when the
reader is controlled by a Host PC. It is possible to activate the beeper by sending a command
from the Host to the reader via the current communication interface.
POWERSCAN
H H H H
long tones
186
STATUS
Symbol Meaning
L low tone
M medium tone
H high tone
®
M8500 READER START-UP
Beeper Meaning
L L L L Parameters loaded correctly
Parameter loading error, reading or writing error in the non volatile
memory
H L H L Hardware error in EEPROM
H M L reader correctly initialized
BEHAVIOR
At power-on, the LEDs blink briefly,
then light up for 2 seconds to signal
the power supply is present.
The LED lights up after a good decod-
ing and will switch off only at the next
trigger press.
PowerScan® M8500