Enter Reader Configuration
This selection is used together with the Alt Mode interface selection for AT or Notebook
PCs.
It changes the way the Alt Mode procedure is executed; therefore it should be set as follows:
•
•
In this way the device will execute the Alt Mode procedure correctly for your application.
70
Caps Lock Auto-Recognition (IBM AT compatible only)
disable
toggle num lock
if your keyboard Num Lock is
if your keyboard Num Lock is
Read 2 numbers from the Hex & Numeric Table where:
00 =
DELAY disabled
01-99 =
DELAY from 1 to 99 milliseconds
delay disabled
WEDGE PARAMETERS
Num Lock
normally on
use num lock unchanged
normally off
use toggle num lock
Inter-character Delay
delay between characters transmitted to Host
Exit and Save Reader Configuration
enable
num lock unchanged
PowerScan® M8500