Table of Contents
Advertisement
GENERAL FEATURES
1.2.1
Indicators
The DX8200 has six LEDs on the control panel.
The indicators have the following functions:
Power ON:
(green). Indicates the scanner is ON. (Figure B,11 or Figure C,7).
Ext Trig:
(yellow). Indicates the external presence sensor is active. (Figure B,12 or
Figure C,8).
Encoder:
(yellow). Indicates the external encoder signal is active (when provided).
(Figure B,13 or Figure C,9).
Good Read: (red). Indicates a probable code is present in the reading zone. (Figure B,14
or Figure C,10).
TX Data:
(green). Indicates data transmission both on the main and on the auxiliary
interface. (Figure B,15 or Figure C,11 ).
Network:
(red). Indicates data transmission on the Lonworks network. (Figure C,12).
Not used for serial interface models.
1.3 AVAILABLE MODELS
The DX8200 scanner is available in the following versions that differ depending on:
•
laser number
•
communication type
•
optical resolution
Laser Number:
2 = Double laser
3 = Triple laser
DX8200 - X X X 0
Optical Resolution:
0 = Standard resolution
1 = High resolution
Communication Type:
0 = Bus Interface version
1 = Serial Interface version
1
3
Advertisement
Table of Contents
