Powerscan M8500 Setup; Package Contents; Installation; Bc-80X0 Interface Cable Connections - Datalogic PowerScan M8500 Product Reference Manual

Package Contents

The following parts are included in the PowerScan® PM8500 package contents:
•
•
•
You may want to save your packing material in case you need to ship the reader at some later
time.

Installation

BC-80X0 Interface Cable Connections

The BC-80X0 incorporates a multi-standard interface, which can be connected to a Host by
simply plugging the correct interface cable into the Host connector, placed on the base of
the cradle. In addition the cradle must be connected to an external power supply.
Figure 8. BC-80X0 Connectors
Figure 9. Disconnecting the BC-80X0 Cable
Product Reference Guide

PowerScan M8500 Setup

PowerScan® PM8500 Hand-Held Reader
CD-ROM containing the PowerScan® PM8500 Configuration Tools software and
PowerScan® PM8500 Reference Manual
PowerScan® PM8500 Quick Reference Manual
Chapter 2

To disconnect the cable, insert a paper clip or
other similar object into the hole
corresponding to the Host connector on the
body of the cradle.
Push down on the clip while unplugging the
cable.
23