Custom Code Identifier - Datalogic PowerScan M8500 Product Reference Manual

Enter Reader Configuration
The following procedure sets a new Code Identifier for a specific barcode symbology:
1. Read the Enter Reader Configuration code at the top of the page.
2. Read one of the following codes that corresponds to the required barcode symbology.
3. Define 1 or 2 identifying characters for each code type. If only 1 identifying character
Example:
Read




86

Custom Code Identifier

is required, the second character must be selected as FF (disabled). Read the hexadeci-
mal value corresponding to the character(s) you want to define as identifiers for the
symbology selected in step 2: valid characters are in the range 00-FD.
To define Code 39 Code Identifier = @
Valid characters are in the range:
Code 39
EAN/UPC
CODE 128
CODE 93
2/5 INTERLEAVED
DATA FORMAT
00-FD
+ 40 + FF = @
Exit and Save Reader Configuration
CODABAR

CODE EAN 128

CODE 39

PowerScan® M8500