1. Read the Enter Configuration code ONCE, available at the top of each page.
2. Read configuration codes from the desired groups.
3. Read the Exit and Save Configuration code ONCE, available at the top of each
74
PEN EMULATION
PowerScan
Operating Mode on page 75
Minimum Output Pulse on page 76
Conversion to Code 39 on page 76
Inter-Block Delay on page 78
= Read the code and follow the procedure given
= Default value
programming page.
®
M8500/BC-80X0 configurations only
Overflow on page 77
Output Level on page 77
Idle Level on page 78
PowerScan® M8500