Display Parameters
Display Mode
The user can control the reader display behavior according to the following selections:
Normal mode:
•
•
•
Clear Display After Decode mode:
•
•
•
Local Echo mode:
•
•
•
•
HOST MESSAGES SENT TO THE READER are always written to the reader display.
Product Reference Guide
When a barcode is read with the reader:
The code is sent to the Host.
The reader display is NOT CLEARED. Therefore if any previous data was displayed
on the reader screen it remains.
There is no Local Echo to the reader display.
The code is sent to the Host.
The reader display IS CLEARED. Therefore if any previous data was displayed on the
reader screen it is cancelled and the screen remains blank.
There is no Local Echo of the code to the reader display.
When a barcode is read with the reader:
The code is sent to the Host.
The reader display IS CLEARED.
The code is also sent to the reader display (Local Echo).
The cursor is positioned after the last printed character on the reader display.
When a barcode is read with the reader:
Display Parameters
173