Rx Timeout; Serial Trigger Lock - Datalogic PowerScan M8500 Product Reference Manual

\
Enter Reader Configuration

"RX Timeout" on page 157
See

Product Reference Guide
RS-232 PARAMETERS
timeout control in reception from Host
Read 2 numbers from the Hex & Numeric Table where:
00 = TIMEOUT disabled
01-99 = TIMEOUT from .1 to 9.9 seconds
 rx timeout 5 seconds
for details.

Serial Trigger Lock

enable and select characters
Read 2 characters from the Hex & Numeric Table in the range 00-FE where:
• First Character enables device trigger
• Second Character inhibits device trigger until the first character is received
again.

RX Timeout

 disabled
Exit and Save Reader Configuration
59