Bc-8060 Star-System™ Network Setup - Datalogic PowerScan M8500 Product Reference Manual

BC-8060 STAR-System™ Network Setup
When the BC-8060 cradle model is used in an RS-485 network, it must be initially
configured. To do this using configuration barcodes, follow the procedure below using any
PowerScan
1.
2.
3.
4.
5.
Product Reference Guide
®
M8500 reader.
four digits for the BC-8060 Address (from 0000 to 1999).
All cradles used in the network must have different addresses.
Read the Bind code to pair the PowerScan
ration.
The green LED on the PowerScan
into the cradle.
Firmly insert the reader into the BC-8060 cradle within 10 seconds, a beep will be
emitted, signaling that the BC-8060 cradle has been paired to the PowerScan
and the green LED on the reader will go off.
Read the BC-8060 restore default code:
Set BC-8060 Address
+
Exit and Save configuration
®
M8500 to the BC-8060 cradle for configu-
Bind
®
M8500 will blink; the reader is ready to be inserted
Restore BC-8060 Default
Setup Procedures
®
M8500,
45