Table of Contents
Advertisement
KIT CONTENTS
Magic Bird EF1 RACER 40E
SEA380PNP
PNP, 46"
1. Fuselage
2. Wing set (2)
3. Tail set (2)
4. Wing tube
5. Cowling
6. Spinner
7. Electric Propeller, 9 x 6E
ADDITIONAL ITEMS REQUIRED
�
power Dualsky 40-size ECO
3520C-V2.
�
Computer radio 4 channel with 4
servos.
�
Glow plug to suit engine.
�
Propeller to suit engine.
�
Protective foam rubber for radio
system.
TOOLS & SUPPLIES NEEDED
hin cyanoacrylate glue.
Medium cyanoacrylate glue.
30 minute epoxy.
5 minute epoxy.
Hand or electric drill.
Assorted drill bits.
Modelling knife.
Straight edge ruler.
2mm ball driver.
Phillips head screwdriver.
220 grit sandpaper.
90° square or builder's triangle.
Wire cutters.
Masking tape & T-pins.
hread-lock.
Paper towels.
RECEIVER INSTALLATION
Make the connections from the rudder
and elevator servos to the receiver. Also
connect the extensions for the laps and
ailerons..
All servo extensions have been provided
when using an eight channel radio. No Y-
harnesses will be required. Mixing at the
transmitter will be required.
When using a six channel radio, a Y-
harness has been included for the laps.
Mixing at the transmitter will be required
to operate the ailerons.
Using a ive channel radio will require
the use of the included Y-harness for
the laps, and an additional Y-harness
(SPMA3058) for the ailerons.
1.
Secure the receiver in the fuselage. Use
the instructions included with the receiv-
er for additional mounting details.Make
sure none of the wires from the receiver
interfere with the operation of the servos.
2.
3
Advertisement
Table of Contents
