PAPER LIFT
2.6 PAPER LIFT
The tray lift motor [C] raises/lowers the tray bottom plate [A] (via the coupling gear
[B]), based on the signals from the paper size switches, paper end sensor, and
upper limit sensor.
The motor starts to lift the plate when all of the following three conditions exist: any
of the paper size switches is pushed, the paper end sensor actuator is in the
sensor, and the upper limit sensor actuator is out of the sensor. The motor stops
lifting the plate when the upper limit sensor actuator enters the sensor.
B456
CÓPIA NÃO CONTROLADA
[A]
10
CÓPIA NÃO CONTROLADA
[B]
B456D005.WMF
[C]
SM