Rev. 7/94
6.8
PAPER LIFT MECHANISM
[F]
When the tray is set in the machine, the machine detects this condition by
using several detection methods as shown in the table:
Feed station
A095 copier
1st
Tray set switch
2nd
Paper size switch
3rd
Tray set switch
When the machine detects that the paper tray is set in the machine, the lift
motor [A] rotates and the coupling gear [B] on the tray lift motor engages the
pin [C] of the lift arm shaft [D], then turns the tray lift arm [E] to lift the tray
bottom plate [F].
FT6645/6655/6665
[A]
[D]
[E]
A096/A097 copiers
Tray set signal through the connector
Paper size switch
LCT set signal through the connector
2-76
[B]
[C]
STM