Ricoh B051 Service Manual page 1104

SERVICE PROGRAM MODE
Mode No.
5
(Class 1, 2, and 3)
404 User Code Counter Clear
001 User Code Counter
Clear
409 Access code
001 Password
002 Access Area
501 PM Alarm
001 PM Alarm Level
002 Original Count
Alarm
504 Jam alarm
1 Jam Alarm
2 Error Alarm
505 Error Alarm
1 Error Alarm
B051/B052
CÓPIA NÃO CONTROLADA
Clears the user code counter.
Registers/changes the password for the key operator.
[0 ∼ 99999999 / 0 / 1 /step]
"0" indicates no code has been registered. SP7-810 can
be used to clear the key operator password.
Decides which programs require key operator codes.
[0 ∼ 2 / 0 / 1 /step]
0: None
1: Some key operator user tool settings
2: All user tool programs
Specifies the PM alarm level.
[0 ∼ 255 / 0 / 1 /step]
0: Disables the PM alarm
1 ∼ 255: Specifies the PM alarm level.
The PM alarm occurs when L x 1000 >= C, where L is
the specified level and C is the current PM counter
value.
Japan Only
Selects the jam alarm level.
[0 ∼ 3 / 3 / 1 /step]
0: Z (none)
1: L (6K x 1/4)
2: M (6K x 1/2)
3: H (6K)
Enables/disables the control call when an unremoved
jam occurs.
[0 ∼ 1 / 0 / 1 /step]
0: Disabled
1: Enabled
An "unremoved jam" is a paper jam that remains
unremoved for 15 minutes. If 1 is selected, the machine
beeps if an unremoved jam has occurred.
Japan Only
[0 ∼ 255 / 40 / 1 /step]
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
5-40
Rev. 04/2004
SM