1. REPLACEMENT AND ADJUSTMENT
CAUTION
Turn off the main power switch and unplug the machine before beginning
any of the procedures in this section.
NOTE: This manual uses the following symbols.
! : See or Refer to
: E-ring
1.1 BRIDGE UNIT DRIVE MOTOR REPLACEMENT
NOTE: When taking apart the bridge unit, first take the unit out of the copier.
1. Bridge unit (! Installation Procedure in the base copier manual)
2. Rear cover [A] ( x 2)
3. Bridge unit drive motor [B] ( x 2, x 1)
SM
CÓPIA NÃO CONTROLADA
BRIDGE UNIT DRIVE MOTOR REPLACEMENT
: Screws
: Connector
1
CÓPIA NÃO CONTROLADA
: Clip ring
[B]
[A]
B482R103.WMF
B482