Rev. 03/2003
3.11 DRIVE UNITS
3.11.1 DEVELOPMENT CLUTCHES
K and Y Development Units
⇒
1. Open the controller box (
2. I/O board cover (
3. Unhook the locks [A] and pull out
the clutches [B] (
NOTE: When reassembling,
connect the black clutch
connector to the DK-CL
coupler and the yellow
clutch connector to the DY-
CL coupler.
C and M Development Units
1. Flywheel [A] (
2. Unhook the locks [B] and pull out the
clutches [C] (
NOTE: When reassembling,
connect the cyan clutch
connector to the blue
coupler [D].
SM
CÓPIA NÃO CONTROLADA
3.10.1).
3.10.1)
x 1).
x 3)
x 1).
3-47
CÓPIA NÃO CONTROLADA
DRIVE UNITS
[A]
B051R803.WMF
[D]
[A]
B051R804.WMF
B051/B052
[B]
[C]
[B]