Tray Shift; Primary Mechanisms - Ricoh B051 Service Manual

2.3 PRIMARY MECHANISMS

2.3.1 TRAY SHIFT

[C]
[B]
[D]
As stated above, the shift tray [A] moves from left to right to create two possible
positions for the copies to stack up. This motion is driven by the tray motor [B],
which connects to the slip disc [C] via a small shaft. The shaft is connected at the
rotational center of the disc. However, there is an off-centered white square
attached to the top surface of the disc. When the tray cover is attached to the unit,
this square fits into a groove [D] (approximately equal to its width) that runs
lengthwise along the underside of the tray.
When the motor is running, the disc rotation causes the off-centered white square
to change position. The square only has freedom of movement along the groove
[D], so the only net motion of the tray is from left to right.
SM
CÓPIA NÃO CONTROLADA
5
CÓPIA NÃO CONTROLADA
PRIMARY MECHANISMS
[A]
B510D101.WMF
B510