Rev. 05/2003
4.3 CONTROLLER FUNCTIONS
4.3.1 SAMPLE PRINT
This function gives users a chance to check the print results before starting a
multiple-set print run.
• The size of the hard disk partition for the sample print feature is 5.8 GB. This
partition is also used by the collation and locked print features.
• The partition can hold up to 30 files, including files stored using locked print.
• The maximum number of pages is 1,000, including jobs using locked print and
collation.
4.3.2 LOCKED PRINT
Using this feature, the print job is stored in the machine but will not be printed until
the user inputs an ID at the machine's operation panel. This ID must match the ID
that was input with the printer driver.
• Stored data is automatically deleted after it is printed.
• Stored data can be manually deleted at the operation panel.
• The hard disk can hold up to 30 files, including files stored using sample print.
• The maximum number of pages is 1,000, including jobs using sample print and
collation.
• Locked print uses the same hard disk partition as sample print and collation,
which is 5.8 GB.
4.3.3 JOB SPOOLING
Print data can be spooled (stored) in the machine's HDD, and the machine starts to
print when data transfer is complete. Since the machine stores all data first before
printing, the host computer is freed up more quickly.
NOTE: 1) The supported print protocols are IPP and LPR.
2) The default setting for this feature is 'off'. The user must switch it on
using UP mode to enable this feature.
• The size of the HDD partition for job spooling is 1 GB.
• The partition can hold up to 50 jobs.
Related SP Modes
Job spooling can be turned on and off using printer service mode for each protocol.
"Job spool (LPR)": Job spooling on/off for LPR.
"Job spool (IPP)": Job spooling on/off for IPP.
The machine does not spool jobs when job spooling is switched off with the SP
mode, even when the customer switches it on with the user mode.
SM
CÓPIA NÃO CONTROLADA
41
CÓPIA NÃO CONTROLADA
CONTROLLER FUNCTIONS
B463/B529