ORIGINAL TRANSPORT AND EXIT
2.8 ORIGINAL TRANSPORT AND EXIT
2.8.1 SINGLE-SIDED ORIGINALS
[E]
[A]
[B]
[C]
The DF feed motor feeds the separated original to the first transport roller [A] at
maximum speed. When the registration sensor [B] detects the leading edge, the
motor stops for a short while. Then the feed and transport motors turn on again,
and feed the original through scanning area at a lower speed (the scanning area
contains the original exposure guide [D] and DF exposure glass [C]). After
scanning, the original is fed out by the second transport roller [E] and exit roller [F].
B386
CÓPIA NÃO CONTROLADA
[D]
18
CÓPIA NÃO CONTROLADA
[F]
B386D506.WMF
SM