1.2.3 EXPANSION MEMORY
NOTE: Expansion memories are not provided. Locally procure an expansion
memory that meets the specifications (same as other recent models — see
the specifications section).
1. Remove the rear cover ( x 2).
2. Remove the fan with the bracket
( x 5, x 1).
3. Remove the ground bracket
( x 3).
4. Remove the BCU cover ( x 13).
5. Remove the FCU ( x 5,
x 2 [U.S. version]/
x 3 [non-U.S. version]).
6. Install an expansion memory [A].
7. Turn the MBU battery switch [B]
(SW1) on, or check that the switch
has been already turned on.
NOTE: The MBU battery switch
(SW1) has been already
turned on if the fax unit
has been correctly
installed.
SM
CÓPIA NÃO CONTROLADA
19
CÓPIA NÃO CONTROLADA
FAX UNIT OPTIONS
[B]
[A]
B502I009.WMF
B502