PAPER FEED AND REGISTRATION
24 June 1994
9.2 PAPER LIFT MECHANISM
[F]
[E]
[A]
[D]
[C]
[B]
When the paper tray [A] is closed after paper is loaded, the plate release
slider [B], which is mounted on the bottom part of the paper tray, is pushed by
the projection [C] of the copier frame and the release slider comes off the
bottom plate hook [D]
Once the release slider comes off, the bottom plate is raised by the pressure
springs [E] and the top sheet pushes up the corner separators [F]. This keeps
the stack of paper at the correct height.
2-48