1.8 ORIGINAL SIZE SENSORS, TRAILING EDGE
SENSOR
[A]
1. Open the original table [A].
2. Upper part of the table ( x 3)
3. Replace the width sensor board [B], length sensor (-1 [C] and -2 [D]) and
trailing edge sensor [E].
NOTE: To ensure proper detection of paper
size, after wiping off the sensor
board and terminal plate with a dry
cloth (or cloth with alcohol), apply
silicone grease (KS-660) to the
terminal plate [F].
SM
CÓPIA NÃO CONTROLADA
ORIGINAL SIZE SENSORS, TRAILING EDGE SENSOR
B386R503.WMF
5
CÓPIA NÃO CONTROLADA
[B]
[E]
B386R504.WMF
[C]
[D]
[F]
B386R505.WMF
B386