Audio - Direct IP Network Camera Operation Manual

 Lens Reset: Click the button to reset the lens setting when video is out of focus by external
shocks. The focus will be adjusted.
 Home Position: Select the default camera position.
− Default: Sets the original factory default position as the home position.
− User Setting: Sets the user-defined position as the home position. Clicking the Setup button
allows you to change the home position.
 Auto Run: Select a function to run when the camera is not controlled for the specified time.
 Auto Pan: Select a pan direction. The camera starts panning in the selected direction when the
remote program commands auto panning to the camera.
 Auto Flip: Flips images or cameras automatically to prevent a moving object from being seen
reversed when camera is tilted more than 90 degrees.
− Digital: Flips images horizontally or vertically.
− Mechanical: Pans or tilts the camera automatically.
− Off: Disables the auto flip function.
 Tilt Range: Set the tilt range.
 Restore: Set whether to enable or disable to remember the last position and function of the camera.
If this is enabled, the camera goes to the last position or runs the last function when the camera
restarts.

Audio

You can set up audio in and out.
Network Camera
41