Audio; In/Out - Direct IP IDIS DC-S1163 Series Operation Manual

Part 1 - Remote Setup
• Home Position: Specify the camera's home position.
- Default: Uses the factory-default position as the
camera's home position.
- User Setting: Uses the user-defined position as the
home position. Select Setup to change the home
position.
• Auto Run: Specify which action to take if the camera
has not been controlled for the specified duration of
time.
• Auto Pan: Specify the camera's panning direction.
When Auto Pan is selected from a remote program,
the camera pans in the direction selected here.
• Auto Flip: Automatically flips the image when the
camera tilts past 90° to prevent the objects from
appearing upside down.
- Digital: Flips the image left to right or top to
bottom.
- Mechanical: Automatically pans or tilts the camera.
- Off: Disables Auto Flip.
• Tilt Range: Specify the camera's tilting range.
• Restore: Specify whether to restore the camera to its
last position or function. Enabling this option restores
the camera to its last position or function after being
restarted.
30

Audio

Configure audio in/out settings.

In/Out

• Audio Codec: Select an audio codec.
• Input: Select an option and then adjust the volume.
• Output: Select an option and then adjust the volume.
Cameras do not feature built-in audio amplifier units
and therefore require the user to purchase a speaker
system with a built-in amplifier separately.