Direct IP Network Camera Operation Manual page 46

Operation Manual
 Run: Selecting the Tour from the list and clicking the button runs the function
 Change: Click to change the Tour setting.
 Delete: Click to delete a saved Tour.
Miscellaneous: Click the tab to set up other functions.
 Focus Mode: Select the focus mode. If the object moves or zoom magnification changes and
it causes a change in the image, it is required to adjust the focus
− Manual: Allows you to adjust the focus manually using remote programs.
− Auto: The camera changes its focus automatically whenever a change occurs in the image.
− Auto – One Push: The camera changes its focus automatically for the first change in the
image after PTZ movement changes. If another change occurs after that, this setting must
be adjusted manually.
40
− Name: Enter the Tour name.
− No.: Displays the order of functions
to run.
− Function: Select a function to run.
− Dwell Time (sec.): Set the dwell time
for the function to last.
− Speed: Set the Preset movement
speed.
.
.