Direct IP Network Camera Operation Manual page 34

Operation Manual
Day & Night: Click the tab to set up day & night settings.
 B&W Mode: When in the black and white mode, images are displayed in black and white and
are clearer in low light conditions. This feature will be disabled if the Day & Night Mode event
action is enabled during the Event – Alarm In setup.
− Off, On: Disables or enables the black and white mode.
− Auto: Disables or enables the black and white mode automatically based on the conditions
where the camera is installed.
− Schedule: Sets up the black and white mode schedule. The black and white mode is enabled
during the date and time scheduled as Nighttime and disabled during the rest. Set up or release
Nighttime by selecting On or Off in the bottom and clicking or dragging the date and time
area in the table. Selecting On or Off and clicking the Select All/Clear All button sets up
or releases Nighttime for all dates and time.
 IR Cut Filter: When the IR cut filter is enabled, the camera blocks infrared light. Images can be
displayed clearly in various lighting conditions by blocking infrared light in bright light conditions
and allowing infrared light in low light conditions. This feature will be disabled if the Day & Night
Mode event action is enabled during the Event – Alarm In setup.
− Nighttime Mode, Daytime Mode: Disables or enables the IR cut filter.
− Auto: Disables or enables the IR cut filter automatically based on the conditions where the
camera is installed.
− Schedule: Sets up the IR cut filter schedule. The IR cut filter is disabled during the date
and time scheduled as Nighttime and enabled during the rest. Set up or release Nighttime
by selecting On or Off in the bottom and clicking or dragging the date and time area in the
table. Selecting On or Off and clicking the Select All/Clear All button sets up or releases
Nighttime for all dates and time
28
.