Mat - Direct IP Network Camera Operation Manual

Operation Manual
The camera can stream live video from the camera to a website.
 HTML Code: Copy the HTML Code that is displayed on the screen and paste it in your web
page code.
 Stream: Select a stream to use for webcasting. Only the streams in use are available.
NOTE: To use the webcasting service, you must check the Allow Anonymous Login option during
3.2 System – User/Group setup.

MAT

Check the MAT box to use the MAT (Motion Adaptive Transmission) function for video streaming
and recording.
 Sensitivity: Set the motion sensitivity. The higher the number is, the more sensitive it is.
 Inactivity Period: Set the inactivity period. The camera will transmit or record images in Frame
Rate set below until any change is detected after the inactivity period when no motion is detected
during the preset inactivity period.
 Frame Rate: Select the frame rate to be applied when no motion is detected. This frame rate
may change when the slow shutter mode is enabled in the Video – Camera menu. The selected
frame rate will be applied until any motion is detected after the inactivity period and will return
to the normal frame rate set during the Stream setup immediately upon detecting any motion.
32