Direct IP Network Camera Operation Manual page 43

 Run: Selecting the Scan from the list and clicking the button runs the function
 Change: Click to change the Scan setting.
 Delete: Click to delete a saved Scan.
Pattern: Click the tab to set up Pattern function.
NOTE: The Pattern function makes the camera move according to the preset path.
A list of the saved Pattern is displayed. The number indicates the Pattern number. Clicking the
Set up button allows you to set up Pattern function
− Name: Enter the Scan name.
− Start, Stop: Select a Preset
position to start or end scanning.
− Dwell Time (sec.): Set the
dwell time for the camera to
stay at the Start and End
position of the scan.
− Speed, Direction: Set the
scanning speed and direction.
.
Network Camera
.
37