Layer 2 Forwarding Database Commands - D-Link DGS-3224TGR Command Line Interface Reference Manual

L
The layer 2 forwarding database commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create fdb
create multicast_fdb
config multicast_fdb
delete fdb
clear fdb
show multicast_fdb
show fdb
config fdb aging_time
Each command is listed, in detail, in the following sections.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
2 F
AYER
Parameters
<vlan_name>
<macaddr>
port <port>
<vlan_name>
<macaddr>
<vlan_name>
<macaddr> [add|delete]
<portlist>
<vlan_name>
<macaddr> [add|delete]
<portlist>
vlan <vlan_name>
port <port>|all
vlan <vlan_name>
mac_address <macaddr>
port <port>
vlan <vlan_name>
mac_address <macaddr>
static
aging_time
<sec 10-1000000>
ORWARDING
51
10
D
ATABASE
C
OMMANDS