Switch Port Commands - D-Link DGS-3224TGR Command Line Interface Reference Manual

The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
config ports
show ports
Each command is listed, in detail, in the following sections.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
S
Parameters
[<portlist | all> [speed [auto | 10_half | 10_full | 100_half | 100_full | 1000_full {[master
| slave]} ] | flow_control [enable | disable] | learning [enable | disable] state [enable |
disable] description <string 32>| clear]
<portlist> {description}
P
WITCH
24
C
ORT OMMANDS
5