D-Link DGS-3224TGR Command Line Interface Reference Manual page 25

reset
Used to reset the switch to the factory default settings.
Purpose
Syntax reset {config|system}
Description This command is used to restore the switch's configuration to the default settings assigned
from the factory.
config − If config is specified, all of the factory default settings are restored on the switch
Parameters
except for the IP address and user accounts.
system − If system is specified all of the factory default settings are restored on the switch.
If no parameter is specified, the switch's current IP address, user accounts, and switch
history log are retained. All other parameters are restored to their factory default settings.
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To restore all of the switch's parameters to their default values:
login
Purpose Used to log in a user to the switch's console.
Syntax login
This command is used to initiate the login procedure. The user will be prompted for his
Description
Username and Password.
Parameters None.
Restrictions None.
Example Usage:
To initiate the login procedure:
DGS-3224TGR:4#login
Command: login
UserName:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#reset config
Command: reset config
Success.
DGS-3224TGR:4#
21