D-Link DGS-3224TGR Command Line Interface Reference Manual page 63

show arpentry
Purpose Used to display the ARP table.
Syntax show arpentry {ipif <ipif_name>|ipaddress <network_address>|static}
Description This command is used to display the current contents of the switch's ARP table.
<ipif_name> − The name of the IP interface the end node or station for which the ARP table
Parameters
entry was made, resides on.
<network_address> − The network address corresponding to the IP interface name above.
static − Displays the static entries to the ARP table.
None.
Restrictions
Example Usage:
To display the ARP table:
DGS-3224TGR:4#show arpentry
Command: show arpentry
ARP Aging Time : 20mins
Interface
-------------
System
System
System
Total Entries : 3
DGS-3224TGR:4#
clear arptable
Purpose Used to remove all dynamic ARP table entries.
Syntax clear arptable
This command is used to remove dynamic ARP table entries from the switch's ARP table.
Description
Static ARP table entries are not effected.
Parameters None.
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To remove dynamic entries in the ARP table:
DGS-3224TGR:4#clear arptable
Command: clear arptable
Success.
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
IP Address MAC Address
--------------- -----------------
10.0.0.0 FF-FF-FF-FF-FF-FF
10.90.90.90 00-01-02-03-04-00
10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Type
-----------------------
Local/Broadcast
Local
59