D-Link DGS-3224TGR Command Line Interface Reference Manual page 34

DGS-3224TGR:4#delete snmp community System
Command: delete snmp community System
Success.
DGS-3224TGR:4#
delete trusted_host
Purpose Used to delete a trusted host entry made using the create trusted_host command above.
Syntax delete trusted _host <ipaddr>
Description This command is used to delete a trusted host entry made using the create trusted_host
command above.
<ipaddr> − The IP address of the trusted host.
Parameters
Restrictions Only administrator-level users can issue this command.
Example Usage:
To delete a trusted host with an IP address 10.48.74.121:
config snmp system_name
Used to configure a name for the switch.
Purpose
Syntax config snmp system_name <sw_name>
Description This command is used to give the switch an alpha-numeric name of up to 128 characters.
Parameters <sw_name> − An alpha-numeric name for the switch of up to 128 characters.
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To configure the switch name for "DGS3224TGR":
.
DGS-3224TGR:4#config snmp system_name DGS3224TGR
Command: config snmp system_name DGS3224TGR
Success.
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#delete trusted_host 10.48.74.121
Command: delete trusted_host 10.48.74.121
Success.
DGS-3224TGR:4#
30