D-Link DGS-3224TGR Command Line Interface Reference Manual page 128

DGS-3224TGR:4#config access_profile profile_id 1 add access_id 1 ethernet vlan default 802.1p 5
permit
Command: config access_profile profile_id 1 add access_id 1 ethernet vlan default 802.1p 5 permit
Success.
DGS-3224TGR:4#
show access_profile
Used to display the currently configured access profiles on the switch.
Purpose
Syntax show access_profile
Description The show access_profile command is used to display the currently configured access
profiles
None.
Parameters
None.
Restrictions
Example Usage:
To display all of the currently configured access profiles on the switch:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#show access_profile
Command: show access_profile
Access Profile Table
Access Profile ID : 1
Type : Ethernet Frame Filter
Ports : All
Masks : VLAN
------------------- --------
ID Mode
--- ------ ---------------- ------
Total Entries : 0
DGS-3224TGR:4#
802.1p
124