D-Link DGS-3224TGR Command Line Interface Reference Manual page 77

Example Usage:
To clear port security entry by port(s):
DGS-3224TGR:4#clear port_security_entry port 1-6
Command: clear port_security_entry port 1-6
Success.
DGS-3224TGR:4#
show port_security
Used to display the port security related information of the switch ports.
Purpose
Syntax show port_security {ports<portlist>}
Description The show port_security command displays the port security related information of the switch
ports, including port security admin state, maximum number of learning addresses, and lock
mode.
<portlist> − A range of ports you want to show. The port list is specified by listing the
Parameters
beginning port number and the highest port number of the range. The beginning and end of
the port list range are separated by a dash. For example, 3 would specify port 3. 4 specifies
port 4. 3-4 specifies all of the ports between port 3 and port 4 − in numerical order.
None.
Restrictions
Example Usage:
To display the port security information of switch ports:
DGS-3224TGR:4#show port_security ports 1-3
Command: show port_security ports 1-3
Port
------- ---------------
1
2
3
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Admin State Max. Learrning Addr.
--------------------------------- ----------------------------
Disabled 1
Disabled 1
Disabled 1
Lock Address Mode
DeleteOnReset
DeleteOnReset
DeleteOnReset
73