D-Link DGS-3224TGR Command Line Interface Reference Manual page 140

show certificate
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To show the certificate file status on the switch:
download certificate
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To download certificate file and key file to the switch:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Used to view the SSL certificate file status on the switch.
show certificate
This command is used to view the certificate file status on the
switch.
None.
None.
DGS-3224TGR:4#show certificate
Command: show certificate
No Certificate Loaded!
DGS-3224TGR:4#
Used to download a certificate file for the SSL function on the switch.
download certificate <ipaddr> certfilename <path_filename 64>
keyfilename <path_filename 64>
This command is used to download a certificate file for the SSL
function on the switch from a TFTP server. The certificate file is a
data record used for authenticating devices on the network. It
contains information on the owner, keys for authentication and digital
signatures. Both the server and the client must have consistent
certificate files for optimal use of the SSL function. The switch only
supports certificate files with .der file extensions.
<ipaddr> - Enter the IP address of the TFTP server.
certfilename <path_filename 64> - Enter the path and the filename
of the certificate file you wish to download.
keyfilename <path_filename 64> - Enter the path and the filename of
the key exchange file you wish to download.
Only administrator-level users can issue this command.
136