D-Link DGS-3224TGR Command Line Interface Reference Manual page 52

enable stp
Used to globally enable STP on the switch.
Purpose
Syntax enable stp
Description This command allows the Spanning Tree Protocol to be globally enabled on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To enable STP on the switch:
DGS-3224TGR:4#enable stp
Command: enable stp
Success.
DGS-3224TGR:4#
disable stp
Purpose Used to globally disable STP on the switch.
Syntax disable stp
This command allows the Spanning Tree Protocol to be globally disabled on the switch.
Description
None.
Parameters
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable STP on the switch:
DGS-3224TGR:4#disable stp
Command: disable stp
Success.
DGS-3224TGR:4#
show stp
Used to display the switch's current STP configuration.
Purpose
Syntax show stp
Description This command displays the switch's current STP configuration.
Parameters None
None.
Restrictions
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
48